Follow these steps to properly inflate your B-BOARD®:

1. Unfold the Board:

Place your B-BOARD® on a flat surface, free of sharp objects.

picture of a bboard folded with a strap to maintain the board folded
bboard unfolded step 1
bboard unfolded step 3
bboard completely unfolded ready to be inflated

2. Prepare the Top Valve:

  • Open the top valve.

  • Make sure the button is in the TOP position (up).

  • Connect the hose to the pump (INFLATE) connector and then attach the hose to the valve (push and turn clockwise).

3. Inflate the Top Part:

Inflate the board (red or black cap inserted > double speed) until you reach the correct pressure:

  • Minimum: 15 PSI

  • Maximum: 25 PSI

4. Disconnect the Hose

  • Once inflated, disconnect the hose (turning it counter-clockwise) from the top valve and close it securely.

5. Prepare the Bottom Valve

  • Flip your board over.

  • Open the bottom valve and connect the hose of the pump.

6. Inflate the Bottom Part

  • Start with 15 pumps with the red or black cap inserted (double speed)

  • If the workout feels too easy, add more air to increase instability (up to 25 pumps maximum).

  • Do not over-inflate the bottom part.

  • You can fine-tune the pressure by pushing down on the button.