Follow these steps to properly deflate your B-BOARD®:

1. Start with the Bottom Part

  • Flip the board bottom side up.

  • Open the bottom valve.

  • Push and turn the button to lock it DOWN — air will start releasing.

  • Press along the surface with your hands to push out as much air as possible.

Finish with the pump (deflate mode):

  • Move the hose to the DEFLATE / “suction” port on your pump.

  • Before attaching the hose to the valve, put the button back to TOP (up).

  • Attach the hose and pump to suck air out.

  • When finished, close the bottom valve.

2. Deflate the Top Part

  • Flip the board top side up.

  • Open the top valve.

  • Push down the button and turn slightly to keep it DOWN — this dumps a good amount of air.

  • From the nose toward the valve, press with your hands to squeeze out more air.

Finish with the pump (deflate mode):

  • Before connecting the hose, return the button to TOP (up).

  • Attach the hose (still on the pump’s deflate port) and pump to suck remaining air out.

  • When finished, close the top valve.

3. Fold & Store

  • Fold your board as shown in the video below, keeping folds neat and compact.

  • Use the straps to secure the folded board.

  • Store it in a cool, dry place — it even fits in the trunk of your car for your next outdoor training.